Liaoyang Hesen Building Material Manufacturing Co., Ltd.
General Manager: Li He
Phone: +86-15541118886
Q Q: 2846862926
Email: 2846862926@qq.com
Address: Wangjia Town, Taizihe District, Liaoyang City, Liaoning Province
Website: en.lnhsjc.com
The masonry methods of the brick wall are one-shunted, three-shunted, and one-dried. Red brick corner
1. One Shun and One Ding: Also known as "Manding Ding Mandiao", it means that one piece of brick is alternately built in accordance with the way of one piece of brick and one piece of brick. This type of building method is the most common and has low technical requirements for workers.
2. Sanshun and Ding: It is made of all the bricks in three skins and all the bricks in one skin. The vertical seam between the upper and lower skin smooth bricks is staggered by 2 bricks; the vertical seam between the upper and lower skin smooth bricks and Ding bricks is staggered by 4 bricks long.
3. Plum flower dicing: It means that every leather brick has cis, and the upper and lower skins are interlaced with cis. This method of building is the most difficult, but the wall has the highest strength.
How many thicknesses does a brick wall make? How thin can a brick wall be?
120 walls, 180 walls, 240 walls, 370 walls. The 120 wall is also called half brick wall, which should be the thinnest. If you build it, the 120 wall will be full, and the 180 wall will stand upright. The 240 wall will have one, one, three, and one plum, and 370 will be more varieties.
There are several ways to build a brick wall, what are their thicknesses
120 walls, 180 walls, 240 walls, 370 walls. The 120 wall is also called half brick wall, which should be the thinnest. If you build it, the 120 wall will be full, and the 180 wall will stand upright. The 240 wall will have one, one, three, and one plum, and 370 will be more varieties.
How to build a 200-thick brick wall
Usually the national standard of the red brick is 240 * 115 * 53, the gray port is about 10, and the thickness of 200 should be 115 + 53 + the middle gray port 10 + the powder port on both sides. The 200-thick brick wall requires a lot of bricks to cut. The top and bottom and left and right brick seams must be staggered: horizontally and vertically, and staggered.